Toyota Tundra 2005 Owner's Manual page 143

WWW.MANUALS.WS
Cap
Covers
Canada only
Type B
142
WWW.MANUALS.WS
'05 TUNDRA_U (L/O 0409)
For owners in Canada
The symbol on a child restraint system
indicates the presence of a lower connec-
tor system.
CHILD RESTRAINT SYSTEM
INSTALLATION
Type A—
1. Turn up the covers for left lower
anchorage on the center position of
the seats and for anchorages on the
left side position of the seats, and
remove the cap for the right lower
anchorage of the center position of
the seat as shown in the illustration.
2. Widen the gap between the seat
cushion and seatback slightly and
confirm the position of the lower an-
chorages below the button and cap
in the seat cushion.
3. Latch the hooks of lower straps onto
the anchorages and tighten the lower
straps.
Type B—
1. Turn up the covers for left lower
anchorage on the center position of
the seats and for anchorages on the
left side position of the seat, and
remove the cap for the right lower
anchorage of the center position of
the seat as shown in the illustration.
2. Widen the clearance gap the seat
cushion and seatback slightly and
confirm the position of the lower an-
chorages below the button and cap
in the seat cushion.
3. Latch the buckles onto the anchor-
ages.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap" in this Section.)
For installation details, refer to the instruc-
tion manual equipped with each product.
2005 TUNDRA from Sep. '04 Prod. (OM34432U)