Toyota Tundra 2005 Owner's Manual page 29

WWW.MANUALS.WS
To lock and unlock all the doors, push
the switches slowly and securely.
To lock: Push the "LOCK" switch. All the
doors are locked simultaneously. At this
time one beep will be heard, and the
parking lights, tail lights and license plate
lights flash once.
Check to see that all the doors are se-
curely locked.
If any of the doors is not securely closed,
locking cannot be performed by
"LOCK" switch and a beep will sound con-
tinuously for 10 seconds. However, if the
key is in the ignition, a beep will not
sound.
To stop the beep, close all the doors se-
curely or push the "UNLOCK" switch.
The beep can be disabled. For details,
contact your Toyota dealer.
To unlock: Push the "UNLOCK" switch
once to unlock the driver's door alone.
Pushing the switch twice within 3 seconds
unlocks all the doors simultaneously. Each
time the "UNLOCK" switch is pushed, two
beeps will be heard, and the parking
lights, tail lights and license plate lights
flash twice.
28
WWW.MANUALS.WS
'05 TUNDRA_U (L/O 0409)
This double switch operation to unlock all
the doors can be changed to a single
switch operation. For details, contact your
Toyota dealer.
When all the doors are unlocked simulta-
neously with a wireless remote control
transmitter, the interior
switch light, step light come on for about
15 seconds and cargo lamp for about 20
seconds before fading out, even if the
door is not opened. (For details, see
the
"Center interior and personal lights", "Igni-
tion switch and step lights" and "Cargo
lamp" in Section 1- 5.)
You have 30 seconds to open a door after
using the wireless remote unlock feature.
If a door is not opened by then, all the
doors will be automatically locked again.
The timing for the automatic door lock
function can be changed. For details, con-
tact your Toyota dealer.
If the "LOCK" or "UNLOCK" switch is kept
pressed in, the locking or unlocking opera-
tion is not repeated. Release the switch
and then push again.
The wireless door locking or unlocking
function can be erased. For details, con-
tact your Toyota dealer.
SWITCHING BEEP SOUND ON AND OFF
You can switch the beep on and off. (The
beep is on initially and after battery re-
placement.)
To switch the beep on and off:
With the driver's door opened—
light, ignition
1. Insert the ignition key and remove it.
2. Within 5 seconds, insert the ignition
key again and turn it to the "ON" posi-
tion.
3. After 10 seconds,
"LOCK", "UNLOCK" or "PANIC" switch
twice within 10 seconds.
Two beep sounds inform you that the
program has been switched on or off.
If this procedure is not followed exactly,
the beep will not operate as expected.
Check the beep ON/OFF operation by
pushing the transmitter switch after you
finish this procedure. If the beep does not
operate as expected, repeat this proce-
dure from step 1.
2005 TUNDRA from Sep. '04 Prod. (OM34432U)
push the same