Toyota Tundra 2005 Owner's Manual page 300

WWW.MANUALS.WS
Fan speed selector
Turn the knob to adjust the fan speed—to
the right to increase, to the left to de-
crease.
Temperature selector
Turn the knob to adjust the temperature—
to the right to warm, to the left to cool.
WWW.MANUALS.WS
'05 TUNDRA_U (L/O 0409)
Air flow selector
Turn the knob to select the vents used for
air flow.
1. Panel—Air flows mainly from
instrument panel vents.
2. Bi- level—Air flows from both the floor
vents and the instrument panel vents.
3. Floor—Air flows mainly from the floor
vents.
It is recommended that you close the
lower vent. For details about this, see
"Instrument panel vents" in this Sec-
tion.
4. Floor/Windshield—Air flows
from the floor vents and windshield
vents.
Turning the air flow selector to the
floor/windshield position turns on the
defogging function with the purpose of
clearing the front view.
This position allows the air intake to
select FRESH automatically. This is to
clean up the front view more quickly.
If you want to return the setting to
RECIRCULATE mode, press the air in-
take selector button once again.
It is recommended that you close the
lower vent. For details about this, see
"Instrument panel and rear vents" in
this Section.
the
Vehicles with "A/C" button—
Press the "A/C" button for dehumidified
heating or cooling. This setting clears
the front view more quickly.
2005 TUNDRA from Sep. '04 Prod. (OM34432U)
mainly
299