Panasonic 308 Installation Instructions Manual page 128

SECTION 400 (Version 3.0)
Issue 1 January 1990
DBS
FF-1 System mode
FFl-2#-3#-2#-(0 - 999,0r 0' - 99')#
PBX Dial 2
Same as PBX Dial 1.
(0 - 9,00 - 99,000 - 999 or 0' - 9*, OO* - 99*)#:
Co access numbers
FFl-2#-3#-3#-(0 - 999,0r 0' - 99*)#
PBX Dial 3
Same as PBX Dial 1.
(0 - 9,QO - 99,000 - 999 or 0' - 9',00' - 99')#:
Co access numbers
FFl-2#-3#-4#-(0 - 999,0r 0' - 99*)#
PBX Dial 4
Same as PBX Dial l_
(0 - 9,00 - 99,000 - 999 or 0' - 9*, 00" - 99')#:
Co access numbers
FFl-2#-3#-5#-(0 - 999,0r 0' - 99*)#
PBX Dial 5
Same as PBX Dial 1.
(0 - 9,00 - 99,000 - 999 or O* - 9*, 00' - 99')#:
Co access numbers
FFl-2#-3#-6#-(0 - 999,0r 0' - 99')#
PBX Dial 6
Same as PBX Dial 1.
(0 - 9,00 - 99,000 - 999 or 0' - 9'. 00' - W)#:
Co access numbers
FFl-2#-3#-7#-(0 - 999,0r 0' - 99*)#
PBX Dial 7
Same as PBX Dial 1.
FF?-2#-3#-a#-(0 - 999,0r 0' - 99*)#
PBX Dial 8
Same as PBX Dial 1.
(0 - 9,00 - 99,000 - 999 or o* - 9', 00' - 99')#:
CO access numbers
FFl-2#-3#-9#-(1- 3)#
Automatic pause position for each dial -
Dial 1
This is the setting for automatically inserting a
pause during the dialing. When the PBX, etc. is
_
accessed for making a call, several seconds are
required from when the PBX receives the access
numberto when the connection is made with a
telephone central office line.
Dialing sent out before this connection is made
will be invalid and may result in a wrong
connection.
With this setting completely trouble free dialing is
enabled. Moreover, this setting is also effective
for dialing from SSD and PSD.
The actual pause time is set separately (pause
timer.FFl-3#-7#)
It is specified after which digit dialed there should
be a pause having made a connection with an
outside line of the system and then dialing I.
[CONFl%: No automatic uause after dialino 1
1C: Automatic pause on 1st digit after dialing 1
atfim
2%: Automatic pause on 2nd digit after dialing 1
atfim
3#: Automatic pause on 3rd digit after dialing l
at first.
Note : Automatic pause can't activate without
setting pause for each trunk(FR-(l-32)+
13%)
(0 - 9.00 - 99,000 - 999 or Of - 9*, 00' - 99')#:
Co access numbers
-17-