Usb Port; The Usb Port - Medion Akoya E4055 D Instruction Manual

USB Port

Diagram reference: A, B
Note
Devices connected directly to the USB port should not draw more than 500
mA. The voltage output is protected by a fuse (Limited Power Source ac-
cording to EN 60950). Should the devices need more power than this, it will
be necessary to provide a hub (distributor / booster).
On the USB it is possible to connect up to 127 devices which correspond to the USB stan-
dard (1.1 and 2.0 supported).
USB 3.0 connectors can also be used to connect USB 1.1 and USB 2.0 devices (USB 3.0
connectors are backwards compatible with USB 2.0 and USB 1.1).
Note
If possible, always connect your USB devices to the same port where it has
been installed. Otherwise you will get a new ID and your operating system
will ask for a new installation of the driver.
After Sales Support TEL: 1300 884 987 WEB Support: www.medion.com.au
37