USB Port
Diagram reference: E1, E2
(optional feature)
On the USB it is possible to connect up to 127 devices which correspond to the USB stan-
dard (1.1 and 2.0 supported).
The USB 3.0 connection sockets are completely compatible to USB 2.0 and 1.1.
42
NOTICE!
Devices connected directly to the USB bus should not draw more
than 500 mA. The voltage output is protected by a fuse (Limited
Power Source according to EN 60950). Should the devices need
more power than this, it will be necessary to provide a hub (dis-
tributor / booster).
NOTICE!
If possible, always connect your USB devices to the same port
where it has been installed. Otherwise you will get a new ID and
your operating system will ask for a new installation of the driver.