Usb Port; The Usb Port - Medion MD 8828 Manual

44

USB Port

Diagram reference: J
Note
Devices connected directly to the USB bus should not draw more than 500
mA.
The voltage output is protected by a fuse (Limited Power Source according
to EN 60950).
Should the devices need more power than this, it will be necessary to pro-
vide a hub (distributor / booster).
On the USB it is possible to connect up to 127 devices which correspond to the USB stan-
dard (1.1 and 2.0 supported).
The data transfer speed is 1.5 Mbit/s or 12 Mbit/s, depending on the device connected.
USB 2.0 can reach up to 480 Mbit/s.
Note
If possible, connect your USB devices always to the same port were it has
been installed. Otherwise you will get a new ID and your operating system
asks for a new installation of the driver.
After Sales Support TEL: 1 300 884 987 WEB Support: www.medion.com.au