Usb Port - Medion MD8825 User Manual

USB Port

Diagram reference: L
Note
Devices connected directly to the USB port should not draw more
than 500 mA.
The voltage output is protected by a fuse (Limited Power Source ac-
cording to EN 60950).
Should the devices need additional power, a hub (distributor/booster)
will be required.
On the USB it is possible to connect up to 127 devices which correspond to the USB
standard (1.1 and 2.0 supported).
The data transfer speed is 1.5 Mbit/s or 12 Mbit/s, depending on the device con-
nected. USB 2.0 can reach up to 480 Mbit/s.
Note
If possible, connect your USB devices always to the same port were it
has been installed. Otherwise you will get a new ID and your operat-
ing system asks for a new installation of the driver.
- 34 -