Entering Route Points; Editing Route Points - Navigon 7100 User Manual

User's manual NAVIGON 7100 | 7110
3. Enter the starting point. (See the corresponding section of chapter
"Navigation" on page 21 ff.)
4. Tap the Set Starting Point button.
The selected starting point will now be displayed next to the
0°(Starting Point) button.
Changing the starting point
Tap the Specify Starting Point field.
►
The S
starting point. Proceed as described above.
7.1.2

Entering route points

Route points are destinations on the route that you want to navigate to.
The flow number for each route point can be found on a button in front
of it.
1. Tap the Add Route Point field.
The R
2. Tap on the button for the desired destination entry type.
3. Enter the route point. (See the corresponding section of chapter
"Navigation" on page 21 ff.).
4. Tap the Add button.
The selected route point will now be shown next to its flow number.
Repeat these steps for each additional destination that you want to add
to your route.
7.1.3

Editing route points

Route points can be deleted from a route. The order of the route points
can be varied as you wish.
Note: The start point (flow number "0") can neither be moved nor
deleted.
Tap on the route point that you want to edit.
►
The context menu contains the following buttons:
Route Point Up: Moves the selected route stage forwards.
(Example: route point 2 becomes route point 1).
- 34 -
menu opens. You can now enter a different
P
TARTING OINT
menu opens.
P
OUTE OINT
Routes with stages