Map functions in Navigation mode
When the map is open in Navigation mode, tap any point on the map.
Buttons with various functions will be displayed.
2D/3D: Changes between 2D and 3D mode. The symbol for the mode that is
currently set is marked orange.
Day/Night: Changes between "day" and "night" display modes. The symbol for
the mode that is currently set is marked orange.
Interim Destination: Opens a menu for entering an interim destination.
The navigation system will first guide you to this interim destination.
Afterwards, you may simply continue navigation to your original
destination.
Skip Route Point: Tap this button to omit the next route point. This button is
inactive when less than 2 route points are pending.
Block: Tap this button in order to block a section of the route that lies in front of
you, i.e. to recalculate the route in order to avoid this section of the
route, e.g. if you have heard of a traffic jam relating to this section on
the radio.
Tap this button again to remove the block.
POI on Your Route: Tap this button to display special destinations on your
route. This enables you to find out, for example, how far it is to the
nearest services. A destination shown here can be added as an interim
destination by tapping the
of its entry in the list.
9.4
Reality View
When, during navigation, you approach a motorway junction, the map
will change to Reality View mode.
Working with the map
User's manual NAVIGON 7100 | 7110
(Interim Destination) button to the right
- 43 -