Closing The Hands-Free Module; Connecting To A Telephone; Pairing With A Mobile Phone; Connecting To A Mobile Phone - Navigon 7100 User Manual

User's manual NAVIGON 7100 | 7110
12.2

Closing the hands-free module

In the B
►
12.3

Connecting to a telephone

NAVIGON 7100 | 7110 must be connected to a mobile phone in order
to use the telephone functions.
12.3.1

Pairing with a mobile phone

Pairing describes the procedure involved when connecting two
Bluetooth devices for the first time. It is necessary to enter a password
into both devices in the process. This password is stored on both
devices, so that further entry is not necessary by subsequent
connections.
Pairing must be initiated from the mobile phone.
Please consult the mobile phone's manual if you are uncertain about
how to carry out the following steps on the mobile phone.
1. Ensure that Bluetooth is activated on the mobile phone.
2. Using the mobile phone, search for other Bluetooth devices.
The navigation device is detected as NAVIGON 7100.
3. Initiate a connection to the detected NAVIGON 7100 device.
The mobile phone prompts you to enter a password.
4. Enter a four digit password (user-defined).
On NAVIGON 7100 | 7110, the P
opens.
5. In the Passkey field, enter the same password that was entered in
the mobile phone.
6. Tap on
The B
established between the two devices. At the bottom edge of the
screen, the name of the connected mobile phone is displayed.
12.3.2

Connecting to a mobile phone

The word connect describes any subsequent connections between
paired Bluetooth devices. No further password entry is necessary when
connecting.
- 52 -
HF P
LUETOOTH HONE
> OK.
HF P
LUETOOTH HONE
window, tap on
R
ASSKEY EQUESTED
window opens. A connection is
(Close).
window
Handsfree Module