Logbook - Navigon 7100 User Manual

In the TMC S
sender, this will determine the effect a received traffic message
concerning your route will have on consequent routing.
Tuning Mode
Tap the Tuning Mode button to determine the settings for the station
you have chosen to receive traffic information.
Automatically: Use the arrow buttons in the station section to tune
►
into another station. The system will search for another station if
reception becomes poor.
Hold station: Use the arrow buttons in the station section to tune
►
into another station. The system will search for the same station on
a different frequency if the signal becomes poor.
Hold frequency: Use the arrow buttons in the station section to tune
►
into another frequency. The system will not search for another
station if reception becomes poor.
Recalculate Route
Tap on Recalculate Route to determine the effect new messages
concerning your route have on route calculation.
Automatically: An alternative route avoiding the traffic obstruction
►
will be calculated.
On request: The message will be displayed. In this window, you can
►
determine whether or not an alternative route should be calculated.
10.4

Logbook

You can use NAVIGON 7100 | 7110 to record a logbook. The logbook
is recorded in the "Logbook.xls" file. You can open the file with
Microsoft Excel. Each recorded trip is added at the bottom of the table
as a new entry.
During the first recording of a trip, the "Logbook.xls" file is created in the
"MN6 Logbook" directory on the navigation device's memory card. If
you delete or move this file, a new file will be created when you next
record a trip.
Note: Trips are recorded simultaneously in an additional file. This file is
compatible with the WISO Sparbuch 2007 program and is called
"MN6DriversLog.bin". It can also be found in the "MN6 Logbook"
directory on the navigation devices memory card.
Note: When logbook recording is started, every movement of the
vehicle will be recorded, even when you are not navigating.
Useful functions
window, you can set and configure the TMC-
ETTINGS
User's manual NAVIGON 7100 | 7110
- 49 -