Monitoring Operation With The Inverter Information Panel; Monitoring Ac Input Status - Xantrex XW4024-230-50 Operation Manual

Monitoring Operation

Monitoring Operation with the Inverter Information Panel

Monitoring AC Input Status

2–2
The Inverter Information Panel monitors a single XW Inverter/Charger. The
Inverter Information Panel displays basic information, allows you to turn the XW
Inverter/Charger on and off and start battery equalization. LEDs on the
Information Panel indicate AC input status, inverter status, battery condition, and
charging and equalization status. The LEDs and three-character display screen
also alert you to XW Inverter/Charger warning and fault conditions.
Grid (AC1)
8.88
Gen (AC2)
Fault /
Warning
Equalize
Figure 2-1 Inverter Information Panel
Grid (AC1) The green Grid (AC1) LED indicates the presence and status of an
AC source connected to the AC1 input.
Symbol LED On
AC input is present and qualified.
The XW Inverter/Charger is ready to
charge batteries, sell power to the
grid, or pass AC through to the loads.
kW Inverting
flashing = sell
A
Charging
Battery
LED Flashing LED Off
AC input is The XW
present, within Inverter/Charger
nominal range is not connected
and is being to the grid. AC
qualified. input is not
present, or AC
input is present
but not within
nominal range.
975-0385-01-01