To Load Cards - Microtek ArtixScanDI 3130c User Manual

To Load Cards

1. Slide the Guide Arms toward the center
of the feed tray and free up the enough
space to put the Card Holder.
2. To install the Card Holder into the feed
tray, with its front side up, slide the
Card Holder along the sides of the
Guide Arms down until it completely
hangs on the arms.
After installed, there will be a slot
hollow space between the Card Holder
and the Document Feed Tray for loading
the card.
3. Insert the card into the slot hollow
space between the Card Holder the feed
tray until it meets resistance, with the
side to be scanned facing up and the
top edge facing toward the feeder.
Note: When scanning a card, you have to choose ADF (Duplex) in the Scan
Source drop-down menu as your image input device; otherwise, it may cause
incorrect or unwanted results for your scanned images.
Guide Arms
ArtixScan DI 3130c User's Manual
Card Holder
17