Replacing The Access Panels; Replacing The Front Access Panel - HP ProLiant DL580 Generation 2 Maintenance And Service Manual

Replacing the Access Panels

To replace the access panels:
1. Place the front access panel on top of the server, and line up the guide marks on the front
access panel with the corresponding server guide marks.
2. With even pressure, push the front access panel down and slide it toward the front of the
server into the fitted slots.
Figure 2-9: Replacing the front access panel
HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide
Removal and Replacement Procedures
2-11