Interlock Status; Interlock Leds - HP ProLiant DL580 Generation 2 Maintenance And Service Manual

Interlock Status

Improperly seated components in the interlock chain cause the LED associated with the fault
origination point to illuminate on the system board. Figure 4-7 and Table 4-7 identify the
location and status of each of the LEDs.
NOTE: Interlock components are required for the system to power up.
IMPORTANT: ProLiant DL580 Generation 2 servers are not equipped with chassis door or access
panel interlocks.
Figure 4-7: Interlock LEDs
Table 4-7: Interlock LEDs
Item
1
2
3
4
5
HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide
Name Status
HPPCI Amber
Off
SCSI Amber
Off
Mem Amber
Off
PPM 1 Amber
Off
Proc 1 Amber
Off
Connectors, LEDs, and Switches
Description
PCI Hot Plug PCA cable or PCI-X Hot Plug board
not installed properly
Normal
SCSI backplane not seated properly
Normal
No memory boards detected; memory boards not
installed properly
Normal
Processor Power Module 1 not installed properly
Normal
Processor 1 not installed properly
Normal
4-9