Cf Card Installation; Figure 2.16Install The Cf Card Into The Cf Slot At The Bottom Of The Main Board; Rs-232/422/485 Jumper Setting; Figure 2.17Rs-232/422/485 Jumper Setting - Advantech ARK-3390 User Manual

2.4.3

CF card Installation

1. Refer 2.4.1-1 to open the HDD door.
2. Install the CF card into the CF slot at the bottom of the Main board.
Figure 2.16 Install the CF card into the CF slot at the bottom of the Main board
3. Replace HDD door and secure with screws.
2.4.4

RS-232/422/485 Jumper Setting

1. Refer to 2.4.1-1 open HDD door
2. Remove frame cover, front/rear bezels, and top cover
3. Refer to 2.2.2 MIO jumper setting to select RS-232/422/485 among COM2
(Jumper on MB), COM3, COM4, COM5, and COM6.
ARK-3390 User Manual
Figure 2.17 RS-232/422/485 jumper setting
20