Power Management Setup - Advantech ARK-3390 User Manual

Serial port 6 [4F8]
This item allows the user to adjust serial port 6 address.
Serial 6 IRQ [IRQ11]
This item allows the user to adjust serial port 6 IRQ.
SP 6 Auto Flow Control [Disable]
Auto flow control is used in RS-485 and used to control the signal transmitter
automatically.
When auto flow control is checked, the device detects the local output buffer
conditions, empty or not empty. If enable, the flow control will force signal to the
desired polarity under the empty or not empty condition.
3.2.6

Power Management Setup

Note! This "Power management Setup" option enable system to be the most
effective energy-saving mode while operating in a manner consistent
with your computer use style.
ACPI Function [Enabled]
This item defines the ACPI (Advanced Configuration and Power Management)
feature that makes hardware status information available to the operating sys-
tem, and communicates to PC and system devices for improved power manage-
ment.
Power Management [Min Saving]
This item allows user to select system power saving mode.
Min Saving
Max Saving
User Define
Video Off Method [DPMS]
This item allows user to determine the manner is which the monitor is blanked.
V/H SYNC+Blank This option will cause system to turn off vertical and horizontal syn-
Blank Screen
DPMS
ARK-3390 User Manual
Minimum power management. Suspend Mode=1 hr.
Maximum power management. Suspend Mode=1 min.
Allows user to set each mode individually. Suspend Mode= Dis-
abled or 1 min ~1 hr.
chronization ports and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
30