NOTES:
Setup monitor and controller port: Open the cap on the underside of the camera, then insert the mating service monitor
•
and controller jack into the plug.
Focus / zoom controls
•
To widen the viewing angle, turn the zoom screw to "W".
—
To narrow the viewing angle, turn the zoom screw to "T".
—
To adjust the focus, turn the focus screw to "N" or "∞" as needed.
—
RS-485+ and RS-485– : Connect to an external RS-485 controller.
•
12 Vdc Power Connector: 12 Vdc, center positive
•
Video output: HD-SDI output to DVR or surveillance monitor with high definition video functionality.
•
1.1.1 Setup monitor and controller cable
Use the setup monitor and controller device to monitor video for directional setup and configuration setup through the on-screen
display (OSD) menus.
1.2 What you need
To install the camera you will need:
Power source
•
Setup monitor
•
Tools for mounting the camera
•
Connector to
service port
2 Megapixel Indoor/Outdoor IR Bullet Camera User Manual
SECTION 1: INTRODUCTION
Video out to
setup monitor
OSD controller
3