Table of Contents
Advertisement
Rotation adjustment
5.
Aim the camera at the center of the preferred field of view. Rotate the camera body as needed to align the horizon in the
image, then tighten the pan, tilt and rotation set screws.
6.
Use a blade screwdriver to adjust the camera focus and zoom as needed.
7.
Configure your camera using the software menus in the on-screen display (OSD). Refer to "SECTION 3 Configuration Setup"
on page 6 for more information.
8.
Power off the setup monitor, then disconnect the setup monitor and controller cable from the service plug.
9.
Reinstall the cap that covers the setup monitor and controller port.
(horizon)
2 Megapixel Indoor/Outdoor IR Bullet Camera User Manual
SECTION 2: INSTALLATION
Pan adjustment
Tilt adjustment
5
Advertisement
Table of Contents
