3.3 EXPOSURE
To open the EXPOSURE menu, rock the joystick down (or up) to highlight EXPOSURE, then press the joystick down (set, select).
BRIGHTNESS: Adjust brightness level: 0 (dark) ~ 20 (bright) steps
•
LENS: DC / MANUAL
•
SHUT SPEED: Can be set in AUTO or MANUAL: AUTO / 1/30 (25), 1/60 (50), 1/120 (100), 1/240, 1/500, 1/1000, 1/2000,
•
1/4000, 1/8000, 1/16000,1/30000, 1/60000 s
FLICKERLESS: Set to On or Off for best video performance. Normally OFF.
•
DSS: Select maximum DSS (Digital Slow Shutter): OFF / x2, x3, x4
•
AGC: Select Auto Gain Control OFF / ON
•
WDR/BLC: Select WDR (Wide Dynamic Range) or BLC (Back Light Compensation). NOTE: When WDR is ON, ACE and DEFOG
•
function will not turn on.
WEIGHT : Adjust WDR level 0 ~ 3
—
BLC
•
AREA : Control BLC area according to light condition.
—
POS-X : Adjust the window X-Axis position
—
POS-Y : Adjust the window Y-Axis position
—
SIZ-X : Adjust the window X-Axis size
—
SIZ-Y : Adjust the window Y-Axis size
—
DAY&NIGHT : Select Day&Night. The MODEL mode determines content of the DAY&NIGHT submenu.
•
D&N Model
AUTO / DAY / NIGHT / EXT
—
Delay : 0 ~ 255 second
»
BURST : OFF / ON
»
THRS : LOW / MIDDLE / HIGH. Select Day&Night change level. Higher level make the night mode changed in lower
»
illumination.
GAP : LOW / MIDDLE / HIGH: Select Day to Night mode change and Night to Day mode change.
»
2 Megapixel Indoor/Outdoor IR Bullet Camera User Manual
SECTION 3: CONFIGURATION SETUP
7