WATER VALVE INSTRUCTIONS
How to open the water valve
1. TURN OFF ALL EQUIPMENT INCLUDING PUMPS.
WARNING! FAILURE TO DO SO CAN RESULT IN INJURY OR
DEATH.
2. Remove the band clamp by turning the clamp knob or 7/16 inch
nut counter-clockwise until it comes off the bolt. Then carefully
pull the clamp away from the valve.
3. Lift the top off the base being careful to not lose or stretch the
o-ring.
4. Remove the module by lifting up and out of the base.
Note: the module is designed to seal inside the base so it may
require a side to side or rocking motion while lifting out. An easy
solution is to turn the pump on and off quickly. CAUTION! DO
NOT APPROACH THE WATER VALVE WHILE THE THE LID IS
REMOVED AND THE PUMP IS ON. FAILURE TO DO SO CAN
RESULT IN INJURY OR DEATH.
5. Do not pull the module by the gear mechanism. This can result in
damage to the module.
8