Nozzles (Cleaning Heads) - Paramount Fitness PCC2000 Owner's Manual

NOZZLES (CLEANING HEADS)

All Paramount nozzles are sized and placed specifically for your
pool by Paramount. These nozzles have different sized open-
ings and if removed, should be returned to the same location.
NOTE: Switching nozzle(s) location will result in poor cleaning
and could severely damage your pool equipment.
All of your system nozzles must extend and retract completely with
each cycle of the water valve. Depending on the cleaning system, it
will take 12 to 18 cycles for a nozzle to rotate 360 degrees. There
are two exceptions to this.
1. The PCC2000 and Vantage systems can have one to three
nozzles (called Fixed Nozzles) that do not rotate and remain active
while pool filter pump is on. These nozzles are located near the
main drain and need to be aimed at the main drain.
2. The optional Swing Jet nozzles are placed on the sidewall of
a pool, and rotate back and forth between three positions in a
90-degree arc. They must retract and extend fully to move to the
next position.
16