Standard
82
Trace a malicious call
Use the Malicious Call Trace feature to trace nuisance calls within your system.
Using Call Trace during a call
Using Call Trace without the Call Trace soft key
NN42020-104 MCS 5100 Release 4.0
Note: This is not a default feature. Contact your system administrator to
configure this feature on your telephone.You cannot use this feature if you
are on an emergency call.
Tap the Call Trace soft key.
1. Perform one of the following:
or
• Tap the Transfer soft key.
• Tap the Conference soft key.
2. Dial the SPRE code followed by 83 or dial the Call
Trace FFC to automatically reconnect.
Standard 01.04
March 2007