Table of Contents
Advertisement
ESC S Outputs the status byte
( "ESC" = ASCII 0x1B )
Command = ESC S<CRLF> -> Answer = m<CRLF>
Outputs the status byte (as a decimal number).
See section 6.6, "Status Byte Format."
Sets or queries whether a header is attached to the output data
H
(OD)
Command = Hm<CRLF> -> Answer = Hm<CRLF>
Command = H?<CRLF> -> Return = Hm<CRLF>
Parameters
m = 0: Î header (default)
The changed setting is valid until the power is turned off.
Resets the peak hold value
HC
Command = HC<CRLF> -> Answer = HC,OK<CRLF>
When peak hold is not enabled, ERR13 is returned.
1: Header
9
Normal Cal.
Normal Cal.
Normal Cal.
Î
Advertisement
Table of Contents
