Page 2
European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification. The information contained in this document is believed to be correct but OMEGA Engineering, Inc. accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.
Page 4
RECHARGE, PUT IN BACKWARDS, MIX WITH USED OR CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a "Basic Component" under 10 CFR 21 (NRC), OTHER BATTERY TYPES. IT MAY EXPLODE OR LEAK used in or with any nuclear installation or activity;...
MAINTENANCE Back View Of Supermeter Battery Door Open WARNING Remove test leads before changing battery or fuse or performing any servicing. Laser Aperture Infrared Measurement Laser Switch Dual Thermocouple Battery Replacement Input (K type T/C) Power is supplied by 6 pcs 1.5V (AA size) battery (UM-3 R6). ®...
How to specify the target emissivity Safety Warnings and IEC Symbols OPERATION 4. Emissivity In order to determine an unknown target Emissivity: All objects emit invisible infrared energy. The amount of energy Before taking any measurements, read the Safety Information 1.
Page 7
INFRARED ELECTRICAL K-type thermocouple ELECTRICAL Button Button (Double Duty) Press to enter the Relative mode, zero the display, and Temperature Range: -20°C to 550°C / -4°F to 1022°F Temperature Scale: Celsius or Fahrenheit user-selectable Press button to select the Manual Range mode and turn off store the displayed reading as a reference value.
Page 8
Note: Unplug any thermocouple probes from the Current Measurements CONTINUITY CAPACITANCE thermocouple input sockets before making any other 1. Set the Function switch anywhere from 430µA to 10A depending Audible indication: <30Ω Ranges: 4.3nF,43nF,430nF,4.3µF,430µF types of measurements. on the range. Overload protection: 500VDC or AC rms Resolution: 0.1pF Voltage Measurements...
Page 9
DC CURRENT DC VOLTS Infrared (Non-Contact) Temperature Measurements Note: Unplug the test leads from the multimeter before Ranges: 430µA,4.3mA,43mA,430mA,10A making any type of thermocouple temperature Ranges: 430mV(manual),4.3V,43V,430V,1000V 1. Set the Function switch to "IR" position. Resolution: 10nA measurements. Resolution: 10µV 2.
Note: Unplug the test leads and thermocouple probes from Diode Tests SPECIFICATIONS Dimensions: 202mm (H) x 100mm (W) x 50mm (D). the multimeter before making any capacitance or Weight: Approx. 18.5 oz. (525g) including battery. 1. Connect the red test lead to the "V "...