Emergency Operation; General - Motorola MTP850 User Manual

Emergency Operation

General

Emergency Operation is available in TMO and in DMO, if the
MTP850 is in service.
Emergency Mode indication (alert tones) can be disabled by
your Service Provider.
Dual Microphone Feature
See "How to Hold Your MTP850" on page 15.
Entering TMO or DMO
See "Selecting TMO or DMO Operation" on page 31.
Important Information
• The required time you need to press the Emergency button is
set by default to 0.5 seconds. The time can be configured by
your Service Provider (Shorter press than configured will not
activate the emergency mode).
• Pressing the Emergency button can be used to activate one
or more services:
- Emergency Mode
- Sending Emergency Alarm
- Starting Hot Mic operation
- Starting emergency individual call
- Powering up the terminal in emergency mode
- Sending the GPS location information,
if this option is enabled by your Service Provider, or
if GPS Pseudo-Disabled feature is enabled
• Pressing the Emergency button even if Transmit Inhibit is
activated causes immediately the MTP850 to transmit. When
entering Emergency Operation the MTP850 should not be
within the RF sensitive area any longer!
• The MTP850 interrupts the AL call when you press the
Emergency button.
• For call alert, see settings in the Vibrate menu option
(page 126) and the Tones menu option (page 132)
.
75