Motorola MTP850 User Manual page 167

• to choose your User ID from the list
highlight the correct one and press
Select
You can press
for the long User ID's that are not fully displayed). Press
again to go back to the previous list.
2. Type your User PIN
When the User PIN is highlighted press
Select and type your User PIN on the next
screen then press Ok.
3. Logging
From this point the request to logon is sent.
You can stop the logging process by pressing
Cancel. When the logging process ends the
display is changed to idle screen.
Color blue of the display is when the user is in full service mode.
In other case the grey scale screen is displayed.
User ID List
The user can check who was using this radio before, by
going to Menu > More > RUI > Log on > User ID. The
chronological list is displayed under the [New User ID].
Log Off
You can change the state that you are logged on by pressing
> More... > RUI > Log Off from the idle screen. The
MENU
radio prompts to accept log off state or to deny it (if you
selected it by mistake).
MENU anytime to view the detailed list (useful
User ID List
[New User ID]
Jan
Peter
Mark
Select Back
MENU
RUI Logon
User ID:______
User PIN:
Select Back
Logging ...
Cancel
159