Motorola MTP850 User Manual page 172

• Data encryption status.
Data services are only available in TMO. The data option must
be set to Voice&Data or Data Only. (Refer to "Setting Up the
Data Function" on page 129).
Viewing Sent Data Statistics
1. Select Sent Data in the Packet Data sub-menu.
The number of KBytes sent since current
packet data activation is displayed.
Additionally the throughput is shown:
9 kbps (e.g.)
N.A.
–
Viewing Received Data Statistics
1. Select Received Data in the Packet Data sub-menu.
2. The number of KBytes received since
current packet data activation is displayed.
Additionally the throughput is shown:
9 kbps (e.g.)
N.A.
–
Viewing Bandwidth Status
The bandwidth percentage represents the number of
allocated time slots ("channels") during the data session.
1. Select Bandwidth in the Packet Data sub-menu.
2. The bandwidth percentage is shown
75% (e.g.)
N.A.
–
164
active packet data session.
–
standby packet data session.
active packet data session.
–
standby packet data session.
active packet data session,
–
standby packet data session.
Sent Data
Sent: 100KB
Throughput:
9kbps
Back
Received Data
Received: 100KB
Throughput:
9kbps
Back
Bandwidth
75%
Back