Motorola MTP850 User Manual page 156

Viewing the Active Scan List
This sub-menu allows you to view the active scan list (Scan
List 1 in this example).
1. From the main menu, select More... > Group Setup
> Scan > Active List. Press View.
The display will show one of the following states:
• There is a selected, inactive scan list (Scan List 1 is
Not Active). Scanning is off.
• Scanning is off and the Network List is selected
(Network List Not Active).
• There is a selected, active scan list. Scanning is on.
Then, the display will show the Scan Lists
sub-menu.
2. Scroll to the required list and press View to
see the groups that belong to the list.
3. Scroll to the required group and press
View to view the group status (attached or
not attached) and priority (if pre-programmed).
4. Press Back to return to the previous display. Then, if
required, press
from the scan list or change its priority.
If the Network List is empty, it will not be displayed.
148
.
You can select to delete the group
MENU
Scan Lists
Scan List 1
Network List
View Back