The display shows the current setting:
1. Time & Date
–
2. Time Only
The MTP850 displays time only. Format Date
–
sub-menu is disabled.
3. Date Only
The MTP850 displays date only. Format Time
–
sub-menu is disabled.
4. Off
The MTP850 does not display time nor date. Format
–
menu is disabled.
Scroll to the desired setting and press Select. Press Back to
exit.
Setting Time Format
To change displayed time format between 24-hour scale and
12-hour scale:
1. From the main menu, select Setup > Time & Date
> Format > Format Time.
2. Scroll through the settings.
3. Choose required setting, and press Select. Press Back to
exit.
Setting Date Format
To change displayed date format between DD/MM/YY, MM/
DD/YY, DD-MON-YY and YY/MM/DD:
1. From the main menu, select Setup > Time & Date
> Format > Format Date.
2. Scroll through the settings.
3. Choose required setting, and press Select. Press Back to
exit.
Time and date are synchronized by the infrastructure. When not
within the infrastructure signal range you can set the values
manually.
The MTP850 displays time and date.
135