Motorola MTP850 User Manual page 187

• Normal call-out
• Storm plan
time to raise reliability. User can only
accept the Call-Out by pressing any button
and is moved to information phase (soft
keys are not labelled).
• Fallback Mode
communication. It can be cleared manually
Fallback is only possible when Radio is in Local Site Trunking.
• Test Call-Out
feature. Radio is generating the tone with "Call-Out Test"
on the display. Only one softkey is enabled "Test OK" to
confirm and to clear the test.
Interactions when the user is in other mode:
• TXI Mode
respond to it. They have an option to leave the TXI Mode
by pressing soft key or reject the Call-Out message.
• DMO Mode
• Emergency Mode
Call-Out service phases
• Alerting phase
alarm tone indicates the message. text is displayed and
under it there are three options for the user to pick: Accept,
Reject or
service from this point can interrupt. Menu key gives more
choices (display on the right).
Call-Out 1
Severity-1
Test Group
Car accident
Accept
The user can stop the alert tone by pressing PTT or any of the soft
keys.
it is sent to a group several
–
it includes only voice
–
dispatcher has the ability to test this
–
users can read the message but they can not
–
Call-Out is not supported.
–
all the Call-out alert are ignored.
–
user receives a Call-Out message. The
–
. If the user will accept the alert no other
MENU
Reject
Storm Plan 1
Call-Out 1
Accept
Standby
Reject
Messages
Exit
Select Back
Test Group
Car accident
179