Dmo Private Call - Motorola MTP850 User Manual

When an InterMNI call is received, you can press Network to
see the Network alias and/or number.
Receiving a Group Call (via Gateway / Repeater)
Group In Use
Folder 1
TG4
Optns Folder
Without alias and
Private ID
(e.g. via gateway)
The display shows the ID of the TMO caller.
The Gateway plus DMO or the Repeater icons are displayed
accordingly to the ongoing call type (Gateway or Repeater).
• If MS to MS mode is selected, and the terminal receives a call
via repeater, the Repeater icon will be shown (if the repeater
mode is enabled by the Service Provider, otherwise the call
will not be accepted).
• If Gateway mode is selected but a gateway is not available,
The Gateway icon will be solid in case of an incoming
gateway call.

DMO Private Call

If configured by your Service Provider it is possible to make
and receive a Private Call in DMO.
However the Gateway and/or Repeater options are activated
they are not used for a DMO Private Call. The DMO Private
Call will be a direct communication between two TETRA
terminals (MS - MS).
For detailed information, see "Private Call in DMO" on
page 68.
Group In Use
ID:124
OR
TG4
Optns Folder
Private ID
without alias
(e.g. via gateway)
Group In Use
ID: David
OR
TG4
Optns Folder
Private ID
with alias
(e.g. via repeater)
63