Motorola MTP850 User Manual page 157

Editing Scan Lists
1. From the main menu,
select More...
> Group Setup
> Scan > Scan Lists.
2. Scroll to the required
scan list. Press View to see the groups used in the scan list.
Press Back to return to the previous display.
3. To edit/view the contents of a scan list, press
4. In the Scan Menu, scroll to the required option and press
Select.
The options below cannot be used for the Network List.
If the Network List is empty, it will not be displayed.
• Rename the active scan list. (For details on text editor
use, see "Writing Text" on page 181). Enter a new name
(alias) and press Ok. The display shows the new
setting.
• Check the capacity of the active scan list (number of
groups stored in the list).
• To Clear all groups from the selected scan list, press
Yes. You will be prompted to remove all groups from the
selected scan list.
• Add a group to the selected scan list. Every added
group (including a favourite group) comes with its folder,
its name or number, and its priority (if pre-programmed).
> To select a folder, scroll through the folder list. The list
does not show folders whose groups are fully used in
the selected scan list. Press Ok to select a folder.
> To select a group, scroll through the group list within
the selected folder. The list shows groups that are not
in the selected scan list. Press Ok.
Scan Lists
Scan List 1
Scan List 2
Network List
View Back
Scan Menu
Rename
Capacity
Clear List
Add Group
Edit
Select Back
.
MENU
149