Table of Contents
Advertisement
RocketRAID 3xxx Driver and Software Installation
Installing the driver for an existing Windows Vista system
1.
Install the RocketRAID 3xxx host adapter into the PC, then boot up Windows
Vista.
2.
Windows should automatically detect the card, and display the "Found New
Hardware" wizard pop-up window. Select "Locate and install driver
software". When Windows asks: "Windows needs your permission to
continue", select "continue".
3.
Select "I don't have disc, show me other options" and then select "Browse
my computer for driver software".
4.
Specify the location of the driver and click "Next".
5.
When asked: "Would you like to install this driver software?", select
"Install".
6.
The RocketRAID 3xxx will be available for use after Vista installation.
Installation Verification
After the driver has been installed:
1.
Click the Start button, select "Settings", then select "Control panel", double click
"System" item.
2.
In the popup window, select Hardware tab and then click Device Manager
button.
3.
Double click the "SCSI and RAID controllers" entry. If the RocketRAID device
entry is not displayed, or there are "?" or "!" marks displayed near the
RocketRAID entry, the driver has not been installed properly. Delete the entries
and reinstall the driver.
4-5
Advertisement
Table of Contents
