Symbol PDT 8000 Series Product Reference Manual page 245

7. Set the area code to match the area code entered earlier, in the Entering Phone
Number screen (see
8. On the Dialing Patterns screen, edit the patterns as shown above, deleting the "9,"
from each location.
9. Tap OK until you return to the Connections screen, and select the Connections tab.
Tap Connect. The Network Log On screen displays.
10. Tap OK. There is no username or password for a GPRS connection.
Note: If the SIM card is protected with a PIN number, a dialog box will pop
up requesting the appropriate PIN number to unlock the SIM card.
In this case, enter the PIN number and tap OK.
Figure 10-6). Tap Dialing Patterns.
Figure 10-9. Dialing Patterns Screen
Wireless Wide Area Network Configuration
10-19