PDT 8000 Series Product Reference Guide
Note: Before communicating through an ethernet connection, you must
create a partnership between your terminal and your host computer.
See
Setting up a Partnership
Configuration of the DHCP Server
If you use a DHCP server to distribute IP addresses and other network parameters, setup
the server as following:
•
IP address pool (1 or 5 IP address per cradle)
•
router/gateway address
•
one or more DNS server addresses
•
one or more WINS server addresses
•
the subnet mask.
Note: To assign the initial cradle IP address, you can either use a DHCP
server, as shown above, or use the MobileDox Cradle Manager, as
illustrated in
is the preferred method.
Configuration of the Cradle
The MobileDox Cradle Manager allows you to setup the Device IP Address and modify
cradle settings. See
download and install the software.
4-26
Configuration of the Cradle
Installing MobileDox Cradle Manager
on page 4-4 for detailed instructions.
on page 4-26. DHCP server
on page 4-9 for instructions to