Symbol PDT 8000 Series Product Reference Manual page 224

PDT 8000 Series Product Reference Guide
;* Password.
;*******************************************************************************
; "MUEncryptionAlgorithm"=dword:00000005
; "ProtocolsToBindTo"=multi_sz:"NOT","NDISUIO"
; "ESS_ID"="myLEAPESSID"
; "UNAME"="myLEAPUserName"
; "UPwd"="myLEAPPassword"
;*******************************************************************************
;* End LEAP Settings
;*******************************************************************************
3. Edit the registry file with the following changes:
a. Comment out the Open System section using semicolons, as shown below:
; "MUEncryptionAlgorithm"=dword:00000001
; "ProtocolsToBindTo"=multi_sz:"NOT","NDISUIO","EAPWLAN"
; "ESS_ID"="CEDSAP"
b. Uncomment the LEAP section by deleting the semicolons, as shown below:
"MUEncryptionAlgorithm"=dword:00000005
"ProtocolsToBindTo"=multi_sz:"NOT","NDISUIO"
"ESS_ID"="myLEAPESSID"
"UNAME"="myLEAPUserName"
"UPwd"="myLEAPPassword"
c. Change the value of the ESS_ID parameter, currently "myLEAPESSID", to your
ESSID. Ensure that the new value entered is kept in quotes.
d. If you want to save the LEAP username and password in the terminal, change
the value of the UNAME and UPwd parameters to the correct username and
password, respectively. Ensure that the new values entered are kept in quotes.
Note: If you do not save the LEAP username and password in the registry,
a dialog box appears asking for this information after a hard reset is
performed on the terminal. After this information is entered, you
must suspend and resume the terminal before utilizing the network.
4. After all changes have been made, save the registry file. If you are using Microsoft
Notepad, click File - Save to save it under that current name.
Note: When saving the file, ensure that you do not change the file type, i.e.
ensure you are saving the file as a .reg file.
5. Close your text editor. The registry file must now be loaded back on the terminal
and a hard reset must be performed on the terminal for the changes to take affect.
9-20