Symbol PDT 8000 Series Product Reference Manual page 223

2. In ActiveSync, click Explore. Windows Explorer will open the Mobile Device
window for your terminal.
3. Navigate to the Platform folder and find the Spectrum24DS.reg file.
4. Right-click the file and click Copy. Place the cursor in the desired folder on your
host computer, right-click, and click Paste.
To make changes to the file
1. Open the Spectrum24DS.reg file you download above in any text editor
application, such as Microsoft Notepad. You cannot double-click to open the file.
You must open it through the application.
2. Locate the following section of the registry file
[HKEY_LOCAL_MACHINE\Comm\NETWLAN1\Parms]
"AdapterModel"="Spectrum 24 802.11b"
"Version"="3.7.11.4"
"CardType"=dword:0
"IoBaseAddress"=dword:300
"IoLength"=dword:46
"PowerIndex"=dword:1; PSP1
; "SerialKey"="3FBA67E6FAAE76AA001A5CB9D1639D128F3DF39FA1FA9FD999798AEFA92683036C0334
C35EE211F50912CB"
"Password"="3745A4CA1FD2D1CFC10041C7576C0E6423A815E6D4D094C8D87441C26A6C0211153
DDE9C851085"
"RogueAPDetection"=dword:1
; "Kerberoskdc" = "krbtgt"
;*******************************************************************************
;* The following lines are for Open System
;* -------------------------------------------------
;* When using LEAP, comment the following keys by
;* putting semicolons (;) in front of these lines
;* If OPEN system is being used, make sure the LEAP
;* keys are commented out below.
;*******************************************************************************
"MUEncryptionAlgorithm"=dword:00000001
"ProtocolsToBindTo"=multi_sz:"NOT","NDISUIO","EAPWLAN"
"ESS_ID"="CEDSAP"
;*******************************************************************************
;* End Open System Settings Section
;*******************************************************************************
;*******************************************************************************
;* The following lines are for LEAP
;* -------------------------------------------------
;* When using LEAP:
;* 1) Comment out the OPEN System lines (above) by
;* putting semicolons (;) in front of those lines.
;* 2) Uncomment the following lines by removing the
;* semicolons.
;* 3) Change myLEAPESSID, myLEAPUserName, and
;* myLEAPPassword to your ESSID, Username, and
Spectrum24 Network Configuration
9-19