Toshiba e-Studio 383P User Manual page 61

7. Remove any jammed paper from the face down stacker.
NOTE
If the edge of the jammed paper protrudes (or can be seen) from the exit,
reinstall the image drum, close the top cover and switch the printer on. Remove
the jammed paper from the exit when the exit roller begins rotating after a few
seconds after switching on. However, if the jammed paper cannot be removed,
contact a service representative.
8. Remove any jammed paper from the face up stacker.
9. Open the rear cover and check for paper in the rear path.
> Pull out any paper found in this area.
> Close it once the paper is removed from this area.
Troubleshooting > 61