Installing The Media Guide For Outside Wound Paper - Toshiba B-SP2D SERIES Owner's Manual

4. INSTALLING THE PRINTER
4.3 INSTALLING THE MEDIA GUIDE FOR OUTSIDE
WOUND PAPER
Either roll direction is acceptable on this printer.
Outside wound paper
However, when using the outside wound paper, it is necessary to fit the media
guide for outside wound paper. Without this part, a paper jam may occur.
When fitting the media guide for outside wound paper, insert it into the slits of
the printer.
NOTES:
1. When using outside wound paper that is 34 to 55mm wide, first fit the media
guides, and then the media guide for outside wound paper.
2. Do not fit the media guide for outside wound paper when using an inside
wound paper.
Slit
Section 4.p65

4.3 INSTALLING THE MEDIA GUIDE FOR OUTSIDE WOUND PAPER

Inside wound paper
Media Guide for Outside
Wound Paper
4- 5
5
EO1-33052
10/31/2005, 11:38 AM