2-Sided Printing; Auto Duplex Printing; Manual Duplex Printing Using The Paper Tray (Windows Only) - Toshiba e-Studio 383P User Manual

2-
SIDED PRINTING
The duplex unit adds the function of two-sided printing, using less paper and making large
documents easier to handle. It also enables booklet printing, which uses even less paper.
You can print using Auto Duplex or Manual Duplex function.
NOTE
The steps in the process relate to Windows XP PCL. Other operating system
windows may appear slightly different, but the principles are the same.
A
UTO DUPLEX PRINTING
This printer provides automatic two-sided printing only for Letter, A4, B5, Executive Legal
13, 13.5 and 14, using paper stocks from 60 - 122g/m².
To carry out Auto Duplex Printing:
1. Select File > Print and click the Properties button.
2. Select the input tray (Tray1, Tray2 (optional), Multi Purpose Tray from the Source
drop down.
3. In the Duplex printing drop down menu, select either Long Edge (Auto) or Short
Edge (Auto) according to your printing preferences.
4. If you require further information, click the Duplex Help button.
5. Click the Print button.
M
ANUAL DUPLEX PRINTING USING THE PAPER TRAY
NOTE
Manual Duplex printing is available only for Windows PCL Driver.
To carry out 2-sided, or Manual Duplex Printing you must pass paper through the printer
twice. You can carry out 2-sided printing using the Paper Tray or the Multi Purpose Tray.
You can use A4, A5, A6, B5, Letter, Legal 13, 13.5 and 14, Statement, Executive and
Custom paper sizes, using paper stocks from 60 - 122g/m².
NOTE
> You cannot use A6 paper size for printing from Tray 2 (option).
> You can print on Legal 13.5 paper only from Tray1, optional Tray2 and
when using Auto Duplex function.
1. Ensure that there is enough paper in the Paper Tray to carry out the print job.
2. Select File > Print and click the Properties button.
3. Select Tray1 from the Source drop down.
(W
2-sided printing > 41
)
INDOWS ONLY