Flow Diagram; Attach Tubing To System; Mount The System Under The Sink - Watts Premier FILTER-PURE Installation, Operation And Maintenance Manual

Flow Diagram

This system has been designed to fit under most kitchen sinks.
Please read the entire manual carefully before proceeding with installation.
Two Stage Under Counter (Filter Pure)
HOT COLD

Attach Tubing to System

The two quick connect elbows are pre installed in to the back of the Filter-Pure
Step 1
system. These elbows can be rotated in order to allow for the green and blue tube
Take the green tube and push in to the quick connect elbow that is by the red colored
Step 2
sediment filter on the left of the system. Make sure the tube is fully pushed in all the
way to the tube stop.
Take the blue tube and push in to the quick connect elbow that is by the yellow
Step 3
colored carbon filter on the right of the system. Make sure the tube is fully pushed
in all the way to the tube stop.

Mount the System Under the Sink

Determine best location for the filtration system to be mounted near the cold water
Step 4
supply angle stop valve to allow for future system maintenance.
Using the mounting holes on the system bracket, mark the location for the mounting
Step 5
screws on the cabinet wall. In the parts bag, locate the 2 self tapping screws. Using
an electric drill with a Phillips bit, screw them into the cabinet wall.
Mount the filtration system.
Counter Top
Sink
Blue
Tubing
Green
Tubing
5