Table of Contents
Advertisement
About the STORE/RECALL functions of the copied data
5
Select the file and press [OK] key.
–
When you select a file and press the [Thumbnail] key, a thumbnail of the selected file is displayed.
For more information of Thumbnail, refer to "Thumbnail" on page 3-17.
–
When you select a file and press the [File Check] key, detailed settings of the selected file are
displayed.
6
Select [FTP] or [SMB], select the destination and press [Setting Screen].
–
Both the FTP and SMB can be transmitted at the same time.
7
Confirm the File Name, FTP Destination, SMB Destination and select File Form and press [OK] key.
–
If a file name longer than 21 characters has been set for the file, characters on the 21st and on are
automatically deleted so that the file name is changed to 20 characters.
Data start to be transmitted to the computer.
The transmitting screen and the continuous storage confirmation screen appears.
8
To continue transmitting data, press the [Yes] key. To finish the transmission, press the [No] key.
–
Pressing the [Yes] key displays the file list screen. Return to the step 5 and repeat the procedures.
VarioLink 9522 (Version 2)
4
4-29
Advertisement
Table of Contents
