7
When an E-Mail address is input manually
1
Follow the Step 1 to 6 of "When an E-Mail address is already registered" on page 7-4.
2
Press the [Manual Destination Input] key.
–
If you select a destination from the registry, refer to "When an E-Mail address is already registered"
on page 7-4.
The Manual Destination Input screen appears.
3
Press the [Address] key to input an address and press [OK] key.
–
Pressing the [Address] key displays the character input screen.
–
For more information on how to input characters, refer to "How to input characters" on page 3-7.
4
Press the [Scan Screen] key.
The Scanner Setting Basic screen appears.
5
Follow the Step 9 and after of "When an E-Mail address is already registered" on page 7-4.
7-8
Using the network scanner features
VarioLink 9522 (Version 2)