3
3
Input the Box Name and press the [OK] key.
–
For more information on how to input characters, refer to "How to input characters" on page 3-7.
The File Name input screen appears.
4
Input the File Name and press the [OK] key.
–
When a corresponding file does not exist, the message "Failed direct call" appears. Confirm that
the Folder Name, Box Name and File Name are correct, and return to the step 1 to repeat the
procedures.
–
In the case of [Direct Call] from the Public Folder, a folder name is not required to be input.
The screen appears with the desired file being selected.
!
Detail
For more information on how to input characters, refer to "How to input characters" on page 3-7.
If the desired file is not found, you are brought back to the list screen, and the message is displayed on
the upper left of the Touch Panel.
3-12
Before using the scanning features
VarioLink 9522 (Version 2)