Before using the scanning features
–
[Single Search] is for up to 20 input search characters at the maximum.
–
In case of [Advanced Search]
–
[Advanced Search] is for up to 20 input search characters at the maximum.
–
To change the search condition, press a key under the "Condition" and change the Condition
Setting on the screen displayed.
–
The search ongoing screen is displayed while in the search.
5
Check the search result.
–
By pressing [Detail], detailed contents of selection can be checked.
6
When transmitting:
–
Select an address for transmission from the result of search and press [Scan Setting]. Then the
Scanner Setting Basic screen appears.
–
Set an original and press [Start] button.
–
Refer to the "About the Scanner Setting Basic screen" on page 7-25 for the Scanner Setting Basic
screen.
–
You can select multiple addresses for transmission.
VarioLink 9522 (Version 2)
3
3-15