Table of Contents
Advertisement
About the STORE/RECALL functions of the copied data
6
Input a File Name and press the [OK] key.
–
For more information on how to input characters, refer to "How to input characters" on page 3-7.
The setting screen appears.
7
Configure the necessary items.
–
For more information on the configurations on the Scanner Setting Basic screen, refer to "About the
Copied Data Storage Setting screen" on page 4-30.
8
Set an original and press the [Start] button.
The original is scanned, and the copied data are stored in a specified box.
The continuous storage confirmation screen appears.
9
To continue storing data, press the [Yes] key. To finish storing data, press the [No] key.
–
Pressing the [Yes] key displays the file list screen. Return to the step 5 and repeat the procedures.
VarioLink 9522 (Version 2)
4
4-25
Advertisement
Table of Contents
