Sony PDW-1500 Operation Manual page 78

When the "AUTO NAMING" sub item of basic menu item
036 is set to "C****"
When the "AUTO NAMING" sub item of basic menu item
036 is set to "title"
1
Before you start, set the "TITLE" sub item of basic
menu item 035 "CLIP TITLE NAMING SELECT" to
"enable," and set a title (see the previous section).
2
Press the MENU button.
3
Rotate the jog dial or the shuttle dial to display menu
item 036.
4
With the STOP button held down, rotate the jog dial or
the shuttle dial to move the "*" to the left of the item
names to "NAMING FORM."
The "*" indicates the selected item.
ITEM-036
FILE NAMING
* NAMING FORM
AUTO NAMING
END
5
With the SHUTTLE button held down, rotate the jog
dial or the shuttle dial to select "free."
You are now able to use clips and clip lists with user-
defined names.
78
7-1 Overview
C0001.MXF
TITLE00001
TITLE00001.MXF
TITLE00001
- C****
- C****
6
With the STOP button held down, rotate the jog dial or
the shuttle dial to move the "*" to the left of "AUTO
NAMING."
7
With the SHUTTLE button held down, rotate the jog
dial or the shuttle dial to select "title."
8
Press the SET button.
The same name will now be given to newly recorded
clips.
To use clips and clip lists with user-defined
names over FAM and FTP connections
Carry out steps 2 to 5 of "To assign clip names on this
unit," and then press the SET button.
It is now possible to write, transfer, and rename clips and
clip lists with user-defined names over file access mode
(FAM) connections (see page 79) and FTP connections
(see page 81).
Fuji.MXF
Able to use clips with user-defined names over FAM and FTP
connections
Sakura.SMI
Able to use clip lists with user-defined names over FAM and FTP
connections
To check clip names
Press the THUMBNAIL button to display the thumbnail
screen, and select the clip whose name you want to check.
The name of the selected clip appears at the upper left of
the screen.
See "Cuing up a desired clip" (page 50) for more
information about the thumbnail screen.
Notes
• The item at the upper left of the screen is displayed
according to the following order of priority.
Title > User-defined clip name > Standard format clip
name
Therefore, the display of this item changes as following,
depending on whether there is a title.
- When a title has been set as a clip name on this unit,
for clips recorded on this unit, the title is displayed.