Sony PDW-1500 Operation Manual page 128

Message in time Display
data display
condition
Non AV Full on, limit, off
b) on, limit, off
Index File!
b) on, limit, off
File System
b) on, limit, off
File System
a) With respect to setting of basic menu item 016
b) This appears from firmware version 1.4.
During reception of commands from an external device connected to the REMOTE connector
Message in time Display
data display
condition
No Disc! on
REC INHI.! on
REC INHI.! on
IMX50 Clip on, limit
IMX40 Clip
IMX30 Clip
DVCAM Clip
4CHx24 Clip
8CHx16 Clip
Run Salvage on, limit
i.LINK! on, limit
128
9-3 Alarms
Description
a)
An attempt was made to record, display
an E-E picture, record an essence mark,
or add a quick scene selection sub clip
when there was no free Non-Real-Time
space.
An attempt was made to record to a disc
containing an unsupported index file.
An attempt was made to record to a disc
with an unsupported file system.
An attempt was made to record to a disc
when its file system was set to inhibit
recording.
Description
a)
A recording, playback, search, or other
command was received with no disc
loaded.
A recording, E-E display, or edit preset
command was received for a write-
protected disc.
A recording, E-E display, or edit preset
command was received with extended
menu item 310 "REC INHIBIT" set to
"on."
A recording, E-E display, or edit preset
command was received with basic menu
item for a disc recorded in a format
different from the specification of basic
menu item 031 "RECORDING
FORMAT."
A recording, E-E display, or edit preset
command was received for a disc that
needs clip recovery (salvage).
An edit preset command was received
with an input signal from the S400
(i.LINK) connector selected.
Action
Insert a different disc with enough free
capacity.
Exchange the disc for one that contains an
index file supported by this unit.
Alternatively, format the disc (see page
39).
It may be possible to play back the disc, but
recording is not possible. Exchange the
disc for one formatted in a file system
supported by this unit. Alternatively, format
the disc (see page 39).
Action
Try the operation again after loading a disc.
Try the operation again after setting the
Write Inhibit tab to the recording enabled
position.
Try the operation again after setting
extended menu item 310 to "off."
See 8-3-2 "Extended Menu Operations"
(page 109) about how to make this setting.
Try the operation again after changing the
setting of basic menu item 031.
See 8-2-2 "Basic Menu Operations" (page
94) about how to change this setting.
Try the operation again after recovering
clips from the disc (salvage function).
See 3-5-7 "Handling of Discs When
Recording Does Not End Normally
(Salvage Function)" (page 39).
To perform this operation, use the VIDEO
INPUT SEL button to select a signal other
than "i.LINK."